office equipment – AKT Motor and Drive https://aktmotor.com Professional supplier of brushed dc motor, brushless dc motor, stepper motor, bldc motor drive and planetary gearbox Thu, 21 Jul 2022 18:51:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 https://aktmotor.com/wp-content/uploads/2021/12/cropped-aktfavicon-1-32x32.png office equipment – AKT Motor and Drive https://aktmotor.com 32 32 57HYM Series hybrid stepper motor https://aktmotor.com/product/57hym-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:19:25 +0000 https://aktmotor.com/?post_type=product&p=7316 φ57 mm round size, Nema 23 standard, 0.9° step angle, up to 160 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

57
HY
40
M
S
309
X
Frame size
Round hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
57HY40MS309 40 0.9° 3.9 1 3.9 25 6 50 0.34
57HY49MS703 49 0.9° 7.3 0.85 6.205 50 6 120 0.51
57HY51MF155 51 0.9° 15.5 0.5 7.75 52 4 125 0.55

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 57HSM Series hybrid stepper motor https://aktmotor.com/product/57hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:18:47 +0000 https://aktmotor.com/?post_type=product&p=7314 57*57 mm squared size, Nema 23 standard, 0.9° step angle, up to 250 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

57
HS
41
M
F
2
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
57HS41ME54 41 0.9° 0.48 5.4 2.592 28 8 130 0.47
57HS41ME104 41 0.9° 1.4 2 2.8 39 4 130 0.47
57HS41MF2 41 0.9° 2 1.5 3 40 4 130 0.47
57HS41MF20 41 0.9° 20 0.6 12 48 4 130 0.47
57HS41MS308 41 0.9° 3.8 1 3.8 38 6 130 0.47
57HS51MF07 51 0.9° 6 0.88 5.28 100 4 220 0.57
57HS51MF206 51 0.9° 2.6 1.41 3.666 62 4 220 0.57
57HS51MS603 51 0.9° 6.3 0.8 5.04 70 6 220 0.57
57HS56MF02 56 0.9° 1.6 2 3.2 100 4 270 0.65
57HS56MF05 56 0.9° 33 0.5 16.5 110 4 270 0.65
57HS56MS075 56 0.9° 0.75 3 2.25 90 6 270 0.65
57HS56MS607 56 0.9° 6.7 1 6.7 80 6 270 0.65
57HS76MF02 76 0.9° 2 2 4 182 4 450 1
57HS76MF21 76 0.9° 21 0.5 10.5 135 4 450 1
57HS76MS10 76 0.9° 10 1 10 137 6 450 1
57HS76MS1 76 0.9° 1 3 3 135 6 450 1
57HS80ME108 80 0.9° 1.82 2.1 3.822 130 8 490 1.1
57HS85MF26 85 0.9° 26 0.5 13 200 4 520 1.2
57HS100MF10 100 0.9° 0.7 3 2.1 200 4 630 1.4

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 42HSM Series hybrid stepper motor https://aktmotor.com/product/42hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:17:53 +0000 https://aktmotor.com/?post_type=product&p=7312 42*42 mm squared size, Nema 17 standard, 0.9° step angle, up to 85 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

42
HS
21
M
F
3
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
42HS21MF3 21 0.9° 21 1.3 3 11 4 16 0.13
42HS25MF25 25 0.9° 25 0.48 12 20 4 18 0.15
42HS25MF33CL 25 0.9° 33 0.4 13.2 20 4 18 0.15
42HS28MF8 28 0.9° 8 0.425 3.4 10 4 20 0.18
42HS34MS30 34 0.9° 30 0.4 12 16 6 36 0.25
42HS34MS15 34 0.9° 15 0.46 6.9 14 6 36 0.25
42HS34MF108A-12 34 0.9° 108 0.15 16.2 15 4 36 0.25
42HS34MF201D 34 0.9° 2.1 1.33 2.793 21 4 36 0.25
42HS34MF88 34 0.9° 88 0.14 12.32 20 4 36 0.25
42HS34MF06 34 0.9° 6 0.8 4.8 20 4 36 0.25
42HS40MF3 40 0.9° 3 1.2 3.6 21 4 56 0.3
42HS40MF106 40 0.9° 1.65 1.68 2.772 35 4 56 0.3
42HS40MF02 40 0.9° 20 0.6 12 36 4 56 0.3
42HS40MF39 40 0.9° 39 0.4 15.6 40 4 56 0.3
42HS40MS02 40 0.9° 2.7 1.2 3.24 28 6 56 0.3
42HS40MS705 40 0.9° 7.5 0.8 6 26 6 56 0.3
42HS48MF03 48 0.9° 1 2.4 2.4 44 4 70 0.38
42HS48MF02 48 0.9° 3.4 1.2 4.08 30 4 70 0.38
42HS48MV30 48 0.9° 30 0.4 12 30 5 70 0.38
42HS48MF25 48 0.9° 25 0.5 12.5 45 4 70 0.38
42HS48MS81 48 0.9° 4.6 1 4.6 28 6 70 0.38
42HS48MS30 48 0.9° 30 0.4 12 30 6 70 0.38

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 39HSM Series hybrid stepper motor https://aktmotor.com/product/39hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:16:49 +0000 https://aktmotor.com/?post_type=product&p=7310 39*39 mm squared size, Nema 16 standard, 0.9° step angle, up to 30 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

39
HS
20
M
F
10
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
39HS20MF10200.9°100.5584100.13
39HS20MF13200.9°120.485.7674100.13
39HS20MS24200.9°240.5127.54100.13
39HS22MF3220.9°31.23.68.24120.135
39HS24MF6240.9°60.674.02104130.14
39HS24MF01240.9°3.513.5124130.14
39HS24MF9240.9°90.54.5104130.14
39HS24MF23240.9°230.4811.04144130.14
39HS26MF202260.9°2.212.2124140.13
39HS26MF8260.9°80.64.894140.13
39HS26MF903260.9°8.50.65.18.54140.13
39HS27MF11270.9°110.55.5134140.13
39HS33MF05330.9°120.67.2204170.18
39HS33MS40330.9°400.312126170.18
39HS37MS30370.9°260.410.4186270.22
39HS39MF14DL390.9°140.57204290.26

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 35HSM Series hybrid stepper motor https://aktmotor.com/product/35hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:15:04 +0000 https://aktmotor.com/?post_type=product&p=7308 35*35 mm squared size, Nema 14 standard, 0.9° step angle, up to 20 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

35
HS
20
M
F
6
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
35HS20MF6 20 0.9° 6 0.5 3 7 4 10 0.11
35HS20MF10 20 0.9° 10 0.4 4 4 4 10 0.11
35HS20MF25 20 0.9° 25 0.45 11.25 7 4 10 0.11
35HS22MF10 22 0.9° 10 0.4 4 4 4 11 0.12
35HS22MF25 22 0.9° 25 0.45 11.25 7 4 11 0.12
35HS25MF45 25 0.9° 45 0.3 13.5 10 4 13 0.15
35HS27MF05 27 0.9° 22 0.5 11 12 4 14 0.16
35HS27MF50 27 0.9° 50 0.24 12 9.5 4 14 0.16
35HS27MF60 27 0.9° 60 0.19 11.4 7.5 4 14 0.16
35HS27MF405 27 0.9° 4.5 0.5 2.25 7 4 14 0.16
35HS33MF4 33 0.9° 4.5 0.5 2.25 7 4 20 0.18
35HS33MF12 33 0.9° 12 0.5 6 15 4 20 0.18
35HS33MF88 33 0.9° 88 0.14 12.32 9.5 4 20 0.18
35HS34MS70 34 0.9° 70 0.1 7 4.8 6 20 0.18

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 35BYJ412B (without leadwire) PM stepper motor https://aktmotor.com/product/35byj412b-without-leadwire-pm-stepper-motor/ Tue, 18 Feb 2020 19:40:53 +0000 http://www.promotortech.com/?post_type=product&p=1201

Specifications:

ModelRated Voltage
(DCV)		Resistance Ω/Phase
(at 25℃)		Max.Freeload Pull-in Frequency
(PPS)		Max.Freeload Pull-out Frequency
(PPS)		Pull-in Torque
(mN.m)		Operation Frequency
(PPS) 		Detent Torque
(mN.m) 		Tempera-ture Rise
(K) 		Noise
(dB) 		Step Angle
(1-2 phase) 

Insulation
Class

35BYJ412B1230＞450≥550≥147200 ≥68.6＜60≤403.75 °/42.5E

Outline:

 

]]> 35BYJ412B PM stepper motor https://aktmotor.com/product/35byj412b-pm-stepper-motor/ Tue, 18 Feb 2020 18:39:32 +0000 http://www.promotortech.com/?post_type=product&p=1196

Specifications:

ModelRated Voltage
(DCV)		Resistance Ω/Phase
(at25℃)		Max.Freeload Pull-in Frequency
(PPS)		Max.Freeload Pull-out Frequency
(PPS)		Pull-in Torque
(mN.m)		Operation Frequency
(PPS) 		Detent Torque
(mN.m) 		Tempera-ture Rise
(K) 		Noise
(dB) 		Step Angle
(1-2phase) 

Insulation
Class

35BYJ412B1230＞450≥550≥147200 ≥68.6＜60≤403.75 °/42.5E

Outline:

 

]]> 35BYJ46 PM stepper motor https://aktmotor.com/product/35byj46-pm-stepper-motor/ Tue, 18 Feb 2020 18:36:26 +0000 http://www.promotortech.com/?post_type=product&p=1193 35BYJ46 PM stepper motor Read More »

]]>

Specifications:

ModelRated Voltage
(DCV)		Resistance Ω/Phase
(at 25℃)		Max.Freeload Pull-in Frequency
(PPS)		Max.Freeload Pull-out Frequency
(PPS)		Pull-in Torque
(mN.m)		Operation Frequency
(PPS) 		Detent Torque
(mN.m) 		Tempera-ture Rise
(K) 		Noise
(dB) 		Step Angle
(1-2phase) 

Insulation
Class

35BYJ4612110≥350≥800≥98100 ≥39.2≤40≤357.5 °/85E
35BYJ4612130≥350≥800≥78.4100≥39.2≤40≤357.5 °/85E
35BYJ4612200≥350≥800≥58.8100≥39.2≤40≤357.5 °/85E
35BYJ4612150≥350≥800≥78.4100≥39.2≤45≤407.5 °/85E

Outline:

 

]]> 30BYJ46 PM stepper motor https://aktmotor.com/product/30byj46-pm-stepper-motor/ Tue, 18 Feb 2020 18:29:35 +0000 http://www.promotortech.com/?post_type=product&p=1189 30BYJ46 PM stepper motor Read More »

]]>

Specifications:

ModelRated Voltage
(DCV)		Resistance Ω/Phase
(at 25℃)		Max.Freeload Pull-in Frequency
(PPS)		Max.Freeload Pull-out Frequency
(PPS)		Pull-in Torque
(mN.m)		Operation Frequency
(PPS) 		Detent Torque
(mN.m) 		Tempera-ture Rise
(K) 		Noise
(dB) 		Step Angle
(1-2phase) 

Insulation
Class

30BYJ4612100≥350≥800≥147100 ≥78.4≤45≤407.5 °/85.25E
30BYJ4612130≥750≥800≥78.4100≥39.2≤45≤407.5 °/85.25E
30BYJ4612200≥350≥600≥58.8100≥39.2≤45≤407.5 °/85.25E

Outline:

 

]]> 28BYJ48-2 PM stepper motor https://aktmotor.com/product/28byj48-2-pm-stepper-motor/ Tue, 18 Feb 2020 18:26:27 +0000 http://www.promotortech.com/?post_type=product&p=1186 28BYJ48-2 PM stepper motor Read More »

]]>

Specifications:

ModelRated Voltage
(DCV)		Resistance Ω/Phase
(at 25℃)		Max.Freeload Pull-in Frequency
(PPS)		Max.Freeload Pull-out Frequency
(PPS)		Pull-in Torque
(mN.m)		Operation Frequency
(PPS) 		Detent Torque
(mN.m) 

Tempera-ture Rise

(K)

Noise
(dB) 		Step Angle
(1-2phase) 

Insulation
Class 

28BYJ48560≥500≥900≥29.4100 ≥29.4≤40≤355.625°/64E
28BYJ4812130≥500≥900≥44.1100 ≥29.4≤40≤355.625°/64E
28BYJ4812200≥500≥900≥34.3100 ≥29.4≤40≤355.625°/64E
28BYJ4812250≥500≥900≥34.3100 ≥29.4≤40≤355.625°/64E
28BYJ4812300≥500≥900≥34.3100 ≥29.4≤40≤355.625°/64E
28BYJ4812

320

≥500≥900≥29.4100 ≥29.4≤40≤355.625°/64E
28BYJ4812380≥500≥900≥29.4

100

≥29.4≤40≤355.625°/64E

Outline:

 

]]>