Telecommunications – AKT Motor and Drive https://aktmotor.com Professional supplier of brushed dc motor, brushless dc motor, stepper motor, bldc motor drive and planetary gearbox Thu, 21 Jul 2022 18:55:53 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 https://aktmotor.com/wp-content/uploads/2021/12/cropped-aktfavicon-1-32x32.png Telecommunications – AKT Motor and Drive https://aktmotor.com 32 32 57HYM Series hybrid stepper motor https://aktmotor.com/product/57hym-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:19:25 +0000 https://aktmotor.com/?post_type=product&p=7316 φ57 mm round size, Nema 23 standard, 0.9° step angle, up to 160 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

57
HY
40
M
S
309
X
Frame size
Round hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
57HY40MS309 40 0.9° 3.9 1 3.9 25 6 50 0.34
57HY49MS703 49 0.9° 7.3 0.85 6.205 50 6 120 0.51
57HY51MF155 51 0.9° 15.5 0.5 7.75 52 4 125 0.55

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 57HSM Series hybrid stepper motor https://aktmotor.com/product/57hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:18:47 +0000 https://aktmotor.com/?post_type=product&p=7314 57*57 mm squared size, Nema 23 standard, 0.9° step angle, up to 250 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

57
HS
41
M
F
2
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
57HS41ME54 41 0.9° 0.48 5.4 2.592 28 8 130 0.47
57HS41ME104 41 0.9° 1.4 2 2.8 39 4 130 0.47
57HS41MF2 41 0.9° 2 1.5 3 40 4 130 0.47
57HS41MF20 41 0.9° 20 0.6 12 48 4 130 0.47
57HS41MS308 41 0.9° 3.8 1 3.8 38 6 130 0.47
57HS51MF07 51 0.9° 6 0.88 5.28 100 4 220 0.57
57HS51MF206 51 0.9° 2.6 1.41 3.666 62 4 220 0.57
57HS51MS603 51 0.9° 6.3 0.8 5.04 70 6 220 0.57
57HS56MF02 56 0.9° 1.6 2 3.2 100 4 270 0.65
57HS56MF05 56 0.9° 33 0.5 16.5 110 4 270 0.65
57HS56MS075 56 0.9° 0.75 3 2.25 90 6 270 0.65
57HS56MS607 56 0.9° 6.7 1 6.7 80 6 270 0.65
57HS76MF02 76 0.9° 2 2 4 182 4 450 1
57HS76MF21 76 0.9° 21 0.5 10.5 135 4 450 1
57HS76MS10 76 0.9° 10 1 10 137 6 450 1
57HS76MS1 76 0.9° 1 3 3 135 6 450 1
57HS80ME108 80 0.9° 1.82 2.1 3.822 130 8 490 1.1
57HS85MF26 85 0.9° 26 0.5 13 200 4 520 1.2
57HS100MF10 100 0.9° 0.7 3 2.1 200 4 630 1.4

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 42HSM Series hybrid stepper motor https://aktmotor.com/product/42hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:17:53 +0000 https://aktmotor.com/?post_type=product&p=7312 42*42 mm squared size, Nema 17 standard, 0.9° step angle, up to 85 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

42
HS
21
M
F
3
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
42HS21MF3 21 0.9° 21 1.3 3 11 4 16 0.13
42HS25MF25 25 0.9° 25 0.48 12 20 4 18 0.15
42HS25MF33CL 25 0.9° 33 0.4 13.2 20 4 18 0.15
42HS28MF8 28 0.9° 8 0.425 3.4 10 4 20 0.18
42HS34MS30 34 0.9° 30 0.4 12 16 6 36 0.25
42HS34MS15 34 0.9° 15 0.46 6.9 14 6 36 0.25
42HS34MF108A-12 34 0.9° 108 0.15 16.2 15 4 36 0.25
42HS34MF201D 34 0.9° 2.1 1.33 2.793 21 4 36 0.25
42HS34MF88 34 0.9° 88 0.14 12.32 20 4 36 0.25
42HS34MF06 34 0.9° 6 0.8 4.8 20 4 36 0.25
42HS40MF3 40 0.9° 3 1.2 3.6 21 4 56 0.3
42HS40MF106 40 0.9° 1.65 1.68 2.772 35 4 56 0.3
42HS40MF02 40 0.9° 20 0.6 12 36 4 56 0.3
42HS40MF39 40 0.9° 39 0.4 15.6 40 4 56 0.3
42HS40MS02 40 0.9° 2.7 1.2 3.24 28 6 56 0.3
42HS40MS705 40 0.9° 7.5 0.8 6 26 6 56 0.3
42HS48MF03 48 0.9° 1 2.4 2.4 44 4 70 0.38
42HS48MF02 48 0.9° 3.4 1.2 4.08 30 4 70 0.38
42HS48MV30 48 0.9° 30 0.4 12 30 5 70 0.38
42HS48MF25 48 0.9° 25 0.5 12.5 45 4 70 0.38
42HS48MS81 48 0.9° 4.6 1 4.6 28 6 70 0.38
42HS48MS30 48 0.9° 30 0.4 12 30 6 70 0.38

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 39HSM Series hybrid stepper motor https://aktmotor.com/product/39hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:16:49 +0000 https://aktmotor.com/?post_type=product&p=7310 39*39 mm squared size, Nema 16 standard, 0.9° step angle, up to 30 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

39
HS
20
M
F
10
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
39HS20MF10200.9°100.5584100.13
39HS20MF13200.9°120.485.7674100.13
39HS20MS24200.9°240.5127.54100.13
39HS22MF3220.9°31.23.68.24120.135
39HS24MF6240.9°60.674.02104130.14
39HS24MF01240.9°3.513.5124130.14
39HS24MF9240.9°90.54.5104130.14
39HS24MF23240.9°230.4811.04144130.14
39HS26MF202260.9°2.212.2124140.13
39HS26MF8260.9°80.64.894140.13
39HS26MF903260.9°8.50.65.18.54140.13
39HS27MF11270.9°110.55.5134140.13
39HS33MF05330.9°120.67.2204170.18
39HS33MS40330.9°400.312126170.18
39HS37MS30370.9°260.410.4186270.22
39HS39MF14DL390.9°140.57204290.26

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 35HSM Series hybrid stepper motor https://aktmotor.com/product/35hsm-series-hybrid-stepper-motor/ Thu, 21 Jul 2022 17:15:04 +0000 https://aktmotor.com/?post_type=product&p=7308 35*35 mm squared size, Nema 14 standard, 0.9° step angle, up to 20 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

35
HS
20
M
F
6
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
35HS20MF6 20 0.9° 6 0.5 3 7 4 10 0.11
35HS20MF10 20 0.9° 10 0.4 4 4 4 10 0.11
35HS20MF25 20 0.9° 25 0.45 11.25 7 4 10 0.11
35HS22MF10 22 0.9° 10 0.4 4 4 4 11 0.12
35HS22MF25 22 0.9° 25 0.45 11.25 7 4 11 0.12
35HS25MF45 25 0.9° 45 0.3 13.5 10 4 13 0.15
35HS27MF05 27 0.9° 22 0.5 11 12 4 14 0.16
35HS27MF50 27 0.9° 50 0.24 12 9.5 4 14 0.16
35HS27MF60 27 0.9° 60 0.19 11.4 7.5 4 14 0.16
35HS27MF405 27 0.9° 4.5 0.5 2.25 7 4 14 0.16
35HS33MF4 33 0.9° 4.5 0.5 2.25 7 4 20 0.18
35HS33MF12 33 0.9° 12 0.5 6 15 4 20 0.18
35HS33MF88 33 0.9° 88 0.14 12.32 9.5 4 20 0.18
35HS34MS70 34 0.9° 70 0.1 7 4.8 6 20 0.18

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 90HSD Series hybrid stepper motor https://aktmotor.com/product/90hs-series-hybrid-stepper-motor/ Tue, 11 Feb 2020 18:33:42 +0000 http://www.promotortech.com/?post_type=product&p=722 90*90 mm squared size, exlusive standard, 1.8° step angle, up to 1300 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 220N(20mm from the flange)
  • Max. axial force: 60N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

90
HS
114
D
E
065
X
Frame size
Round hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
90HS65DE053651.80.5352.632081.22200
90HS78DE062781.80.6253.152081.83200
90HS95DE052951.80.5263.170082.43600
90HS114DE0651141.80.6563.9100083.54200
90HS150DE0821501.80.8264.9130084.85100

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 86HYD Series hybrid stepper motor https://aktmotor.com/product/86hy-series-hybrid-stepper-motor/ Tue, 11 Feb 2020 18:27:02 +0000 http://www.promotortech.com/?post_type=product&p=718 φ86 mm round size, Nema 34 standard, 1.8° step angle, up to 800 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 220N(20mm from the flange)
  • Max. axial force: 60N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

86
HY
64
D
F
1
X
Frame size
Round hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
86HY64DE08B25641.8°0.843.220085701.5
86HY64DE09B25641.8°0.932.714185701.5
86HY64DF1641.8°12.52.518045701.5
86HY64DF707641.8°7.71.259.62522045701.5
86HY64DS20D641.8°200.71413065701.5
86HY75DF02751.8°0.26.81.3616048001.9
86HY92DE04921.8°2.725.4350812002.6
86HY92DF12B921.8°0.1560.9350412002.6
86HY92DE02D28921.8°0.554.52.475350812002.6
86HY92DF105B921.8°1.52.834.245460412002.6
86HY122DE02YJ1221.8°0.843.2480817503.2
86HY122DF02YJW1221.8°1.82.85.04600417503.2
86HY122DF03D14B21221.8°1.13.53.85600417503.2
86HY129DE07PJ1291.8°0.753.5440821003.6
86HY129DF604B1291.8°6.41.429.088445.8421003.6

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 86HSD Series hybrid stepper motor https://aktmotor.com/product/86hs-series-hybrid-stepper-motor/ Tue, 11 Feb 2020 18:18:43 +0000 http://www.promotortech.com/?post_type=product&p=713 86*86 mm squared size, Nema 34 standard, 1.8° step angle, up to 1300 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 220N(20mm from the flange)
  • Max. axial force: 60N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

86
HS
65
D
E
035
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
86HS65DE034651.8°0.3451.7290814001.7
86HS65DS202651.8°2.324.6300614001.7
86HS65DF1651.8°12.82.8310414001.7
86HS66DE048661.8°0.484.52.16220815001.9
86HS78DF042781.8°0.425.52.31500418502.05
86HS78DF033781.8°0.3361.98490418502.05
86HS78DF6781.8°6212550418502.05
86HS80DS8801.8°81.512500619002.1
86HS80DE075801.8°0.7543460819002.1
86HS90DF07901.8°0.7543600423002.4
86HS96DF102961.8°1.32.43.12450427002.8
86HS114DE11141.8°144420832003.15
86HS114DE0331141.8°0.336.32.079620832003.15
86HS114DF1021141.8°1.256850432003.15
86HS114DE2041141.8°2.42.86.72650832003.15
86HS118DE0351181.8°0.357.12.485607835003.3
86HS120DF027T1201.8°0.276.51.742800438003.5
86HS120DE11201.8°14.54.5800838003.5
86HS150DE021501.8°0.84.53.6800845004.2
86HS150DF0561501.8°0.566.23.4721200445004.2
86HS150DE0851501.8°0.8575.951200845004.2
86HS150DE0251501.8°0.24122.881300845004.2

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 60HSD Series hybrid stepper motor https://aktmotor.com/product/60hs-series-hybrid-stepper-motor/ Tue, 11 Feb 2020 17:54:28 +0000 http://www.promotortech.com/?post_type=product&p=706 60*60 mm squared size, Nema 24 standard, 1.8° step angle, up to 450 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

60
HS
44
D
F
045
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

ModelLength
(mm)		Step angle degResistance
(Ω)		Current
(A)		VoltageHolding torque
(N.cm)		Lead wires/pinsRotor inetia
（g.cm²）		Weight
（kg）
60HS44DF045441.8°0.454.21.8910642800.62
60HS44DF073441.8°0.732.82.04410642800.62
60HS56DE2D561.8°2.124.212084000.8
60HS66DS201B661.8°2.12.8421065701.02
60HS66DF207PJ661.8°2.72.83.3618045701.02
60HS66DF1661.8°13.53.521045701.02
60HS76DF1761.8°13321047201.18
60HS78DF304781.8°3.426.830047501.2
60HS78DE076781.8°0.763.52.720887501.2
60HS80DF075801.8°0.754320048001.3
60HS88DE103881.8°1.333.921589301.48
60HS88DF065881.8°0.6542.630049301.48
60HS88DS206881.8°2.625.221069301.48
60HS88DS075881.8°0.753.52.62521069301.48
60HS100DE11001.8°13.53.5320812001.65
60HS100DE061001.8°0.653352812001.65
60HS100DF031001.8°0.372.1440412001.65
60HS100DF071001.8°0.742.8400412001.65
60HS100DF1021001.8°1.23.54.2440412001.65
60HS100DS1041001.8°1.434.2350612001.65
60HS100DS2041001.8°2.42.15.04280612001.65

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]> 57HYD Series hybrid stepper motor https://aktmotor.com/product/57hy-series-hybrid-stepper-motor/ Tue, 11 Feb 2020 17:44:49 +0000 http://www.promotortech.com/?post_type=product&p=702 φ57 mm round size, Nema 23 standard, 0.9° or 1.8° step angle, up to 160 Ncm holding torque,  customizable]]>

General Specification:

  • Step Angle Accuracy: ±5%（full step， no load）
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max （rated current, 2 phase on）
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min，500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max（450g load）
  • Shaft Axial Play: 0.08mm max（450g load）
  • Max. radial force: 75N(20mm from the flange)
  • Max. axial force: 15N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

57
HY
41
D
F
40
X
Frame size
Round hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia （g.cm²） Weight （kg）
57HY41DS5 41 1.8° 5 1 5 43 6 55 0.36
57HY41DF40 41 1.8° 40 0.5 20 42 4 55 0.36
57HY41DF404 41 1.8° 4.4 1.5 6.6 45 4 55 0.36
57HY41DS29 41 1.8° 29 0.4 11.6 27 6 55 0.36
57HY41DS206 41 1.8° 2.6 1.5 3.9 30 6 55 0.36
57HY41DS07 41 1.8° 32 0.38 12.16 30 6 55 0.36
57HY51DE5 51 1.8° 5 1 5 53 8 120 0.51
57HY51DE101 51 1.8° 1.1 2.1 2.31 52 8 120 0.51
57HY51DS19 51 1.8° 13 0.7 9.1 50 6 120 0.51
57HY51DF35 51 1.8° 0.55 3.5 1.925 72 4 120 0.51
57HY51DF204 51 1.8° 2.4 1.4 3.36 69 4 120 0.51
57HY51DF72 51 1.8° 0.72 2 1.44 55 4 120 0.51
57HY55DF2 55 1.8° 2 1.4 2.8 60 4 140 0.6
57HY55DF205 55 1.8° 2.5 1.4 3.5 57.5 4 140 0.6
57HY56DF093 56 1.8° 0.93 1.5 1.395 70 4 145 0.62
57HY56DS27 56 1.8° 27 0.42 11.34 62 6 145 0.62
57HY56DF20 56 1.8° 20 0.6 12 58.5 4 145 0.62
57HY56DS12 56 1.8° 27 0.42 11.34 62 6 145 0.62
57HY76DS17 76 1.8° 17.7 0.68 12.036 90 6 300 0.96
57HY76DS206 76 1.8° 2.6 1.8 4.68 110 6 300 0.96
57HY76DF048 76 1.8° 0.48 4.7 2.256 160 4 300 0.96
57HY76DF306 76 1.8° 3.6 1.5 5.4 90 4 300 0.96

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
]]>