35HSM Series hybrid stepper motor

35*35 mm squared size, Nema 14 standard, 0.9° step angle, up to 20 Ncm holding torque,  customizable

General Specification:

  • Step Angle Accuracy: ±5%(full step, no load)
  • Resistance Accuracy: ±10%
  • Inductance Accuracy: ±20%
  • Temperature Rise: 80℃ max (rated current, 2 phase on)
  • Ambient Temperature: -20℃~+50℃
  • Insulation Resistance: 100MΩ min,500VDC
  • Dielectric Strength: 500VDC for one minute
  • Shaft Radial Play: 0.02mm max(450g load)
  • Shaft Axial Play: 0.08mm max(450g load)
  • Max. radial force: 28N(20mm from the flange)
  • Max. axial force: 10N
  • Rotation: CCW
  • Insulation Class: B(130℃)

Defination of Part number:

35
HS
20
M
F
6
X
Frame size
Square hybrid stepper motor*
Length
Step angle**
Lead wire***
Winding Type
External code

**: This code shows the sharp of the motor. HS = Square hybrid stepper motor; HY = Round hybrid stepper motor.
**: This code shows the stepper angle of the motor. M = 0.9°; D =1.8°.
***: This code shows the lead wire number of the motor, the detail code defination is: F = 4; V = 5; S = 6; E = 8.

Specifications:

Model Length (mm) Step angle deg Resistance (Ω) Current (A) Voltage Holding torque (N.cm) Lead wires/pins Rotor inetia (g.cm²) Weight (kg)
35HS20MF6 20 0.9° 6 0.5 3 7 4 10 0.11
35HS20MF10 20 0.9° 10 0.4 4 4 4 10 0.11
35HS20MF25 20 0.9° 25 0.45 11.25 7 4 10 0.11
35HS22MF10 22 0.9° 10 0.4 4 4 4 11 0.12
35HS22MF25 22 0.9° 25 0.45 11.25 7 4 11 0.12
35HS25MF45 25 0.9° 45 0.3 13.5 10 4 13 0.15
35HS27MF05 27 0.9° 22 0.5 11 12 4 14 0.16
35HS27MF50 27 0.9° 50 0.24 12 9.5 4 14 0.16
35HS27MF60 27 0.9° 60 0.19 11.4 7.5 4 14 0.16
35HS27MF405 27 0.9° 4.5 0.5 2.25 7 4 14 0.16
35HS33MF4 33 0.9° 4.5 0.5 2.25 7 4 20 0.18
35HS33MF12 33 0.9° 12 0.5 6 15 4 20 0.18
35HS33MF88 33 0.9° 88 0.14 12.32 9.5 4 20 0.18
35HS34MS70 34 0.9° 70 0.1 7 4.8 6 20 0.18

Outline:

 

Customization:

shaftencoderbrakeconnectorencodergearbox
 Shaft EncoderBrakeConnectorPulleyGearbox
  • Shaft Extensions: All motors can be supplied with single or double ended shaft, keyway or flat cut can made according to per customer’s request. The length of shaft can made as per customer’s request too.
  • Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
  • Brake option: All motors can be supplied with brake with or without hand release.
  • Cable harness & intergrated connector: Cable harness with or without connectors or intergrated connectors can be supplied according customer’s request.
  • Pulley & pinion gear: Pulley or pinion gear is available according to customer’s request.
  • Gearbox option: Most of our motors can be supplied with gearboxes, such as planetary gearbox, worm wheel gearbox and parallel shaft gearbox.
Shape

Square

Stepper Size

35

Step Angle

0.9

Customization

Yes

Nema

14

Scroll to Top